HP 8360 - Page 314

SCPI COMMAND SUMMARY
1NITiate:CONTinuous OFF
LIST:DWELlvalueis 100 /JS (MINimum)
LIST:DWELl:POINts? returns al
LIST:FREquencyvalueis (MAX+MIN)/2
LIST:FREQuency:POINts? returns a 1
LIST:MANual 1
LIST:MODEAUTO
LIST[:POWerl:CORRectionO
LIST[:POWer]:CORRection:POINts? returns al
LIST:TRIGger:SOURce IMMediate
MARKer[nl:AMPLitudeC:STATel OFF
MARKer[n] :AMPLitude:VALue 2 DBM
MARKer[nl:FREQuency value same as FREq:CENT *RST value
MARKer[nl:MODE FREquency
MARKerCn] [:STATe] OFF
POWer:ALC:BANDwidth:AUTO ON
POWer:ALC:CFACtor -16 DBM
POWer:ALC[:SOURcel INTernal
POWer:AMPLifier:STATE:AUTO ON
POWer:ATTenuation:AUTO ON
POWer:CENTerO DBM
POWer[:LEVel] 0 DBM
POWer:MODEFIXed
POWer:SLOPeO
POWer:SLOPe:STATe OFF
POWer:SPAN 0 DB
POWer:STARt 0 DBM
POWer:STATe OFF
POWer:STEP:AUTO ON
POWer:STEP[:INCRement] 10 DB
POWer:STOP 0 DBM
PULSe:FREquency500 KHZ
PULSe:PERiod2 ps
PULSe:WIDth 1~s
PULM:EXTernal:DELayMINimum
PULM:EXTernal:POLarityNORMal
PULM:INTernal:DELay value is 0
PULM:INTernal:FREQuency value is 500 kHz
PULM:INTernal:GATE OFF
PULM:INTernal:PERiodvalueis 2 ps
PULM:INTernal:TRIGger:SOURce INTernal
PULM:INTernal:WIDthvalueis 1~s
PULM:SLEW MINimum
PULM:SLEW:AUTO ON
PULM:SOURce INTernal
PULM:STATe OFF
ROSCillator:SOURce:AUTO ON
SWEep:DWELl 100 ps
SWEep:DWELl:AUTO OFF
SWEep:POINts 11
S-16 Operating and Programming Reference
HP 8360
User’s Handbook