Chapter 2
Installing and Configuring
Control Panel
19
LAN LED The LAN LED provides status information about the LAN interface. When the LAN LED
is flashing, there is activity on the LAN
Locator button
and LED
The locator button and LED are used to help locate this server within a rack of servers.
When the button is engaged, the blue LED illuminates and an additional blue LED on
the rear panel of the server illuminates. This function may be remotely activated.
a. See the Troubleshooting chapter of this guide and refer to the HP 9000 rp3410 and HP 9000
rp3440 Operations Guide for details and information provided by the system LEDs.
Table 2-1 Control Panel LEDs and Switches (Continued)
Name Function
To Next Page
Loading...
