Appendix A
hp Server rx2600 Support Management Station
Installing the hp Server rx2600 SMS
138
Align these snap-studs on one side and press the bezel onto the tape array front. Then do the same
on the other side. See figure below:
Figure A-11 Attaching the Tape Array 5300 Front Bezel
Step 8. Install the drive bay bezels for vacant drive bays slots.
Align the two fingers on the right side of the bezel with the two slots in the drive bay and press in
the bezel.
Figure A-12 Installing the Tape Array 5300 Vacant Drive Bay Bezels
Figure A-13 Tape Array Front Bezel and Vacant Drive Bay Bezels Installed
Vacant Drive
Bay Bezels
To Next Page
Loading...
