HP 9000 Superdome - JET Help Menu

Appendix H
JUST Exploration Tool
JET Interactive Mode
217
JET Help Menu
To obtain help on available JET run parameters, enter the -h argument in the run line as shown in
Figure H-13.
Figure H-13 JET Help Menu
% jet -h
usage: jet [-d <debug level>] [-f <complex> <node>] [-h] [-i] [-v]
Where:
-d <debug level> = set debug level, valid values are 0 - 4.
-f <complex name> <node number> = force a disconnect.
-h = print this help page.
-i = interactive mode.
-o = Use old complex.cfg file format.
-r = Perform Jtag resets on all paths prior to scanning.
-s <complex name> = interrogate only the specified complex.
-v = print JET version information.