Chapter 3
Preparing Superdome for Booting
Moving the Superdome System and Related Equipment to the Installation Site
30
Moving the Superdome System and Related Equipment to the
Installation Site
Carefully move the SPU cabinet (or cabinets, if there are more than one) and its related equipment to the
installation site, but not into its final location. (If the system is to be placed at the end of a row, you will need
to add side bezels before positioning the cabinet in its final location.) Check the path from where the system
was unpacked to its final destination to make sure the way is clear and free of obstructions. If you are
required to move the cabinet up ramps, be sure to maneuver it using three people.
To Next Page
Loading...
