Appendix A
hp Server rx2600 Support Management Station
Installing the hp Server rx2600 SMS
139
Mounting the Optional TFT5600
Supplied with the TFT are left and right tool-less rack mounting rails and slides. Each rack rail uses two
studs and a locking mechanism to secure it.
Step 1. Locate both left and right tooless rack rails.
Step 2. For each rail, locate two holes at the appropriate rack location, both front and back, and push the
locking mechanism until is snaps.
Figure 7-1 TFT5600 Rails and Slides Mounted to System/E Cabinet Rack
Step 3. Pull out the slides until they lock, both left and right.
Step 4. Mount the TFT5600 to the slides using supplied 3/8-inch, 6-32 Phillips-head screws. There are two
screws on each side.
Figure 7-2 Installing the TFT5600
To Next Page
Loading...
