Chapter 3
Preparing Superdome for Booting
Attaching the Leveling Feet and Leveling the SPU Cabinet
41
Attaching the Leveling Feet and Leveling the SPU Cabinet
After you position the SPU cabinet, attach and adjust the leveling feet using the following procedure:
Step 1. Remove the leveling feet from their packages.
Step 2. Attach the leveling feet to the cabinet using four (T25 Torx) screws.
Figure 3-9Attaching the Leveling Feet
Step 3. Screw down each leveling foot clockwise, until it is in firm contact with the floor.
6/2/00
60IN016A
BPS 5
BPS 4
To Next Page
Loading...
