HP 9000 Superdome - Page 240

Appendix H
JUST Exploration Tool
JET Interactive Mode
216
JET Interactive DEVICE SELECTION for path number 2
Select the correct device for: jab, Reference designator: U15
1) jab 0x082b2291
2) jab 0x182b2291
3) jab 0x282b2291
Enter selection: 3
Select the correct device for: jab, Reference designator: U16
1) jab 0x082b2291
2) jab 0x182b2291
3) jab 0x282b2291
Enter selection: 3
Select the correct device for: jab, Reference designator: U3
1) jab 0x082b2291
2) jab 0x182b2291
3) jab 0x282b2291
Enter selection: 3
Select the correct device for: jab, Reference designator: U2
1) jab 0x082b2291
2) jab 0x182b2291
3) jab 0x282b2291
Enter selection: 3
JET Interactive Update menu.
Select from the following options.
1) Load new node configuration file.
2) Add a Board to an existing node.
3) Remove a Board from an existing node.
4) Load flex mate file.
5) Add a Link.
6) Remove a Link.
X) Return to previous menu.
Enter selection: x
JET Interactive MAIN MENU!
Select from the following options.
1) Run JET.
2) Display current configuration data.
3) Update configuration.
X) Exit
Enter selection: x