Using Bluetooth
User’s Guide 8–13
After two devices are paired, they have a trusted relationship with
each other. No additional input is needed from the user.
Therefore, connections and activities can be performed between
the paired devices without constant authorization from the user.
To pair devices:
1. From the Today screen, tap the iPAQ Wireless icon in the
Command bar > Bluetooth > Manager.
2. Tap Tools > Paired devices.
3. Tap Add.
4. Tap the Lookup icon.
5. Tap a device.
6. Enter a password in the Passkey field.
7. Tap OK.
8. Enter the same password into the other device.
NOTE: Some devices, such as mobile phones, need to be placed
in a mode to accept a bond from another device. Refer to that
device’s user instructions for more information.
Unpairing Devices
You can remove a paired relationship between devices.
1. From the Today screen, tap the iPAQ Wireless icon in the
Command bar > Bluetooth > Manager.
2. Tap Tools > Paired devices.
3. Tap a device name.
4. Tap Remove.
5. Tap Yes to remove the pairing.
To Next Page
Loading...
