4. Grasping the pickup-roller cover with thumb and forefinger, squeeze the left side of the pickup-
roller cover to release the left retaining tab, and then slide the cover to the left and up.
CAUTION Failure to slide the cover to the left when removing it can cause the right
retaining tab to break.
5. Press the two black retaining tabs outward until the pickup roller is released from its seat.
ENWW Clean the pickup roller (tray 1) 47
For more information on the LaserJet P2015 Visit www.PrinterSupplies.com 800-551-1943
To Next Page
Loading...