Applies license keys to the router. See “set features
command” on page 159.
features
Sets the iSCSI port parameters. See “set iSCSI
command” on page 160.
iscsi [<PORT_NUM>]
Sets the Internet Simple Name Service (iSNS)
parameters. See “set iSNS com-
mand” on page 160.
isns
Sets the management port parameters. See “set
mgmt command” on page 161.
mgmt
Sets the NTP parameters. See “set NTP com-
mand” on page 161.
ntp
Configures CLI properties for the blade. See “set
properties command” on page 162.
properties
Sets the Simple Network Management Protocol
(SNMP) parameters, such as the symbolic name
and log level. See “set SNMP com-
mand” on page 162.
snmp
Sets system parameters, such as the symbolic
name and log level. See “set system com-
mand” on page 163.
system
Sets VPGs on the blade. See “set VPGroups
command” on page 164.
vpgroups [vpgroup index]
Set alias
Assigns an alias name to a presented iSCSI target.
Admin sessionAuthority
set alias
Syntax
Example:
MPX200 <2> (admin) #> set alias
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.01.50001fe150070ce9
1 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.02.50001fe150070ce9
2 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.03.50001fe150070ce9
3 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.04.50001fe150070ce9
4 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.01.50001fe150070cec
5 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.02.50001fe150070cec
6 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.03.50001fe150070cec
7 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.04.50001fe150070cec
Please select a iSCSI node from the list above ('q' to quit): 0
A list of attributes with formatting and current values will follow.
MPX200 Multifunction Router 157