HP StorageWorks 6100 - Enterprise Virtual Array User Manual

3. After the server reboots, add support for iSCSI devices using the MPIO applet (Figure 33 and
Figure 34).
NOTE:
You must present a virtual disk to the initiator to enable the Add support for iSCSI devices
check box (see Figure 33).
Figure 33 MPIO MPIO Properties page before reboot
.
Figure 34 MPIO Properties page after reboot
.
4. Reboot the system to MPIO the devices.
MPX200 Multifunction Router 59

HP StorageWorks 6100 - Enterprise Virtual Array Specifications

General

Brand	HP
Model	StorageWorks 6100 - Enterprise Virtual Array
Category	Storage
Language	English