HP StorageWorks 6100 - Enterprise Virtual Array

qsrIsInitAddressType
InetAddressType
Syntax
Read-onlyAccess
Type of iSCSI initiator’s IP address (IPv4 or IPv6).Description
qsrIsInitAddress
InetAddress
Syntax
Read-onlyAccess
IP address of the iSCSI initiator.Description
qsrIsInitStatus
Integer:
1 = unknown,
2 = loggedIn,
3 = loggedOut,
4 = recovery
Syntax
Read-onlyAccess
Status of the iSCSI initiator, that is, whether or not it is logged in to the
router.
Description
qsrIsInitOsType
SnmpAdminString
Syntax
Read-onlyAccess
The type of the iSCSI initiator's operating system.Description
qsrIsInitChapEnabled
Integer: 0 = enabled; 2 = disabled
Syntax
Read-onlyAccess
A value indicating whether CHAP is enabled or not for this iSCSI initiat-
or.
Description
LUN table
These tables contain information about the LUN list.
qsrLunTable
SEQUENCE OF QsrLunEntry
Syntax
Simple Network Management Protocol setup196