show targets
Displays the WWPN and WWNN for all targets that are zoned in with the router ports. If one or
more data LUNs are exposed to the router ports from the target, no information is shown.
Session: miguser
Example:
MPX200 (miguser) #> show targets
Target Information
--------------------
WWNN 50:08:05:f3:00:1a:15:10
WWPN 50:08:05:f3:00:1a:15:11
Port ID 02-03-00
State Online
WWNN 50:08:05:f3:00:1a:15:10
WWPN 50:08:05:f3:00:1a:15:19
Port ID 02-07-00
State Online
Offline Data Migration344
To Next Page
Loading...
