0 0 0 0 0 0
Example 4:
MPX200 <1>#> show perf tgt_wbyte
WARNING: Valid data is only displayed for port(s) that are not
associated with any configured FCIP routes.
Displaying bytes/sec (target mode write)... (Press any key to
stop display)
GE1 GE2 FC1 FC2
--------------------------------
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
Show presented targets
Displays the targets presented by the FC router, iSCSI router, or both.
NoneAuthority
fc
iscsi
show
presen-
ted_tar-
gets
Syntax
Displays FC presented targets.
fc
Keywords
Displays iSCSI presented targets.
iscsi
Example 1:
MPX200 <1>#> show presented_targets fc
No Presented Targets found.
Example 2:
MPX200 <1>#> show presented_targets iscsi
Presented Target Information
iSCSI Presented Targets
====================
Name iqn.1986–03.com.hp:fcgw.mpx200.0834e00025.b1.01.50001fe150070ce9
Alias
<MAPS TO>
WWNN 50:00:1f:e1:50:07:0c:e0
WWPN 50:00:1f:e1:50:07:0c:e9
Name iqn.1986–03.com.hp:fcgw.mpx200.0834e00025.b1.02.50001fe150070ce9
Alias
<MAPS TO>
WWNN 50:00:1f:e1:50:07:0c:e0
WWPN 50:00:1f:e1:50:07:0c:e9
Name iqn.1986–03.com.hp:fcgw.mpx200.0834e00025.b1.03.50001fe150070ce9
Alias
<MAPS to>
WWNN 50:00:1f:e1:50:07:0c:e0
Command referencecommand reference176
To Next Page
Loading...
