3 20:70:00:c0:ff:d5:9a:05, 01-0f-ef HP MSA2012fc-3 Unknown
Please select a Target Id from the list above ('q' to quit): 1
Symbolic Name (Max = 128 characters) [HP HSV210-1]
Target Type (1=SrcTarget, 2=DstTarget, 3=Src+Dest Target) [3 ] 1
Bandwidth for Migration (0=Array Bandwidth, 1-400 MBps ) [0 ]
Do you want to apply array license (yes/no) [No ]yes
All attribute values for that have been changed will now be saved.
Viewing data migration license usage
You can view the usage for the data migration licenses from either the mpx Manager GUI or the CLI.
This section provides both methods.
Viewing data migration license usage in the GUI
Follow this procedure to view the usage of data migration licenses in the GUI:
1. In the mpx Manager left pane, select the Services tab.
2. In the left pane, click mpx MPX200: <IP address>
License usage appears on the Data Migration Info page, as shown in Figure 114.
Figure 114 Data Migration Info
.
Viewing data migration license usage in the CLI
Follow this procedure to view the usage of data migration licenses in the CLI:
MPX200 Multifunction Router 295
To Next Page
Loading...
