chap
chassis
fc [port_num]
features
initiators [fc or iscsi]
initiators_lunmask
iscsi [port_num]
isns [port_num]
logs [last_x_entries]
luninfo
lunmask
luns
memory
mgmt
ntp
perf [ byte | init_rbyte
| init_wbyte
| tgt_rbyte
| tgt_wbyte ]
presented_targets [fc or iscsi]
properties
snmp
stats
system
targets [fc or iscsi]
vpgroups [vpgroup index]
show
Syntax
Displays configured CHAP iSCSI nodes. See
“show CHAP command” on page 166.
chap
Keywords
Displays chassis information and status. See “show
chassis command” on page 167.
chassis
Displays FC port information. See “show FC
command” on page 168.
fc [port_num]
Displays the current settings for a particular FCIP
route or for all FCIP routes. See “show fciproutes
command” on page 168.
fciproutes [<link_id>]
Displays licensed features. See “show features
command” on page 169.
features
Displays initiator information for iSCSI or FC. See
“show initiators command” on page 169.
initiators [fc or iscsi]
Displays initiators and the LUNs to which they are
mapped. See “show initiators LUN mask com-
mand” on page 169.
initiators_lunmask
Displays iSCSI port and configuration information.
See “show iSCSI command” on page 170.
iscsi [port_num]
Displays the router’s iSCSI name server (iSNS)
configuration. See “show iSNS com-
mand” on page 171.
isns [port_num]
Displays the router’s logging information. See
“show logs command” on page 171.
logs [last_x_entries]
MPX200 Multifunction Router 165
To Next Page
Loading...
Need help?
General