HP StorageWorks 6100 - Enterprise Virtual Array

Unable to create an object for the target
device; exceeded the maximum number of
target devices.
ErrorApp
QLBA_CreateTargetDeviceO-
bject: Too many devices
41058
Unable to create an object for the target node;
exceeded the maximum number of target
devices.
ErrorApp
QLBA_CreateTargetNodeOb-
ject: Too many devices
41060
Memory unavailable for LUN object.ErrorApp
QLBA_CreateLunObject:
LunObject memory unavail-
able
41067
Unable to create an object for initiator object;
exceeded the maximum number of initiators.
ErrorApp
QLBA_CreateInitiatorOb-
ject: Too many initiators
41077
Process control block status indicates that a
peripheral component interface/interconnect
(PCI) error occurred during a target operation.
ErrorApp
QLBA_DisplayTargetOpera-
tionStatus: PCI Error,
Status 0x%.2x
41096
Process control block status indicates that a
direct memory access (DMA) error occurred
during an initiator operation.
ErrorApp
QLBA_DisplayInitiatorOper-
ationStatus: DMA Error,
Status 0x%.2x
41106
Process control block status indicates that a
transport error (protocol) occurred during an
initiator operation.
ErrorApp
QLBA_DisplayInitiatorOper-
ationStatus: Transport
Error, Status 0x%.2x
41107
Process control block status indicates that a
data overrun error occurred during an initiator
operation.
ErrorApp
QLBA_DisplayInitiatorOper-
ationStatus: Data Over-
run, Status 0x%.2x
41111
iSCSI login failed between receipt of protocol
data unit (PDU) and request for the data seg-
ment.
ErrorApp
QLIS_LoginPduContinue:
Operation failed. Initiat-
or 0x%x, TPB status 0x%x
41234
iSCSI login failed due to unsupported version
number in received login PDU.
ErrorApp
QLKV_ValidateLoginTrans-
itCsgNsgVersion failed
(status 0x%x)
41238
iSCSI login PDU contains invalid initiator
name. The format and character set used to
form the initiator name is invalid.
ErrorApp
QLIS_LoginPduContinue:
Invalid initiator name.
Initiator:
41257
iSCSI target login was attempted to a portal
(iSCSI1 or iSCSI2) on which the target is not
presented.
ErrorApp
QLIS_LoginPduContinue:
Target not configured for
Portal
41265
iSCSI login PDU received for a target with a
target name unknown to the router.
ErrorApp
QLIS_LoginPduContinue:
Target not found. Target
name:
41267
iSCSI login PDU received without a target
name for a normal session.
ErrorApp
QLIS_LoginPduContinue:
Missing target name
41268
iSCSI login PDU received without an initiator
name key/value.
ErrorApp
QLIS_LoginPduContinue:
TSIH is 0 but Initiator-
Name key/value not
provided
41270
Log messageslog messages210