iSCSI processor SRAM test failed.FataliSCSI
#%d: qlutm_init: Diagnost-
ic failed, invalid SRAM
69652
iSCSI processor failed diagnostic reboot.FataliSCSI
#%d: qlutm_init: Diagnost-
ic failed, fail reboot
69653
iSCSI processor failed NVRAM diagnostic.FataliSCSI
#%d: qlutm_init: Diagnost-
ic failed, invalid NVRAM
69654
iSCSI processor failed DRAM diagnostic.FataliSCSI
#%d: qlutm_init: Diagnost-
ic failed, invalid DRAM
69655
iSCSI processor failed to return diagnostic
results.
FataliSCSI
#%d: qlutm_init: Failed
to return diagnostic res-
ult to Bridge
69656
Response queue entry contains an invalid
handle.
FataliSCSI
#%d: QLUtmProcessRespon-
seQueue: Invalid handle
%x EntryType %x
69941
Set NVRAM reboot timer failed.FataliSCSI
#%d: QLSetNvram: QLReboot-
Timer failed AF %x RS %x
Time %d
69951
Port disable reboot timer failed.FataliSCSI
#%d: QLDisable: QLReboot-
Timer failed AF %x RS %x
Time %d
69964
Port enable reboot timer failed.FataliSCSI
#%d: QLEnable: QLReboot-
Timer failed AF %x RS %x
Time %d
69966
iSNS response contains an invalid handle.FataliSCSI
#%d: QLProcSrblessiSNS-
Response: Invalid handle
%x
70224
Start iSCSI processor failed.FataliSCSI
#%d: QLInitializeDevice:
QLStartAdapter failed
70400
iSCSI processor firmware initialization failed.FataliSCSI
#%d: QLInitializeAdapter:
QLInitializeFW failed
70417
iSCSI processor port fatal error.FataliSCSI
#%d: QLDoInterruptService-
Routine: PortFatal inter-
rupt. PortFatalError-
Status %08x CSR %08x AS
%x AF %x
70432
Start iSCSI processor reboot timer failed.FataliSCSI
#%d: QLStartAdapter:
QLRebootTimer failed AF
%x RS %x Time %d
70448
iSCSI processor fatal system error.FataliSCSI
#%d: QLIsrDecodeMailbox:
System Error 8002 MB[1-7]
%04x %04x %04x %04x %04x
%04x %04x
70489
MPX200 Multifunction Router 215
To Next Page
Loading...
