HP StorageWorks 6100 - Enterprise Virtual Array

iSCSI processor reported an invalid Accept
Target I/O (ATIO) Continuation type x.
ErroriSCSI
#%d: QLUtmReceiveScsiCmd:
Invalid ATIO Continuation
type %x
74068
iSCSI processor reported an Immediate data
address (xxxxxxxx:xxxxxxxx) in an unsuppor-
ted PDU type.
ErroriSCSI
#%d: QLUtmProcessRespon-
seQueue: Immediate data
addr %08x:%08x in unsup-
ported PduType
74069
iSCSI processor could not connect with the
iSCSI name server (iSNS).
ErroriSCSI
#%d: QLiSNSEnableCall-
back: iSNS Server TCP
Connect failed
74241
iSCSI processor reported that the iSCSI port
NVRAM contains invalid data (checksum er-
ror).
ErroriSCSI
#%d: QLIsrDecodeMailbox:
NVRAM invalid
74577
iSCSI processor reported a duplicate IP ad-
dress was detected (address xxxx xxxx xxxx
xxxx xxxx).
ErroriSCSI
#%d: QLIsrDecodeMailbox:
AEN %04x, Duplicate IP
address detected, MB[1-5]
%04x %04x %04x %04x %04x
74580
iSCSI processor reported a link down condi-
tion.
ErroriSCSI
#%d: QLIsrDecodeMailbox:
Link down
74587
Driver failed to receive a heartbeat from the
iSCSI processor for the specified number of
seconds.
ErroriSCSI
#%d: QLReadyTimer: Ad-
apter missed heartbeat
for %d seconds. Time left
%d
74656
iSCSI processor (adapter) failed to provide a
heartbeat for x seconds.
ErroriSCSI
#%d: QLReadyTimer: Ad-
apter missed heartbeat
for 0x%x seconds
74659
iSCSI processor failed to complete an abort
request.
ErroriSCSI
#%d: QLReadyTimer: Abort
pTpb=%p failed, DrvCount
0x%x
74660
Driver timed out an iSCSI processor operation
and is aborting the operation.
ErroriSCSI
#%d: QLTimer: Abort pTpb=
%p, Type %x, Timeout 0x%x
DrvCount 0x%x, DdbIndex
0x%x
74661
Driver timed out an iSCSI processor mailbox
command.
ErroriSCSI
#%d: QLReadyTimer:
MBOX_CMD %04x %04x %04x
%04x %04x %04x %04x %04x
timed out
74663
Driver timed out while attempting to reconnect
with the iSNS.
ErroriSCSI
#%d: QLReadyTimer: QLiSNS-
Reenable failed.
74665
iSCSI processor was restarted.ErroriSCSI
#%d: QLProcessSystemEr-
ror: Restart RISC
74705
iSCSI processor rejected the firmware initialize
command.
ErroriSCSI
#%d: QLInitializeFW:
MBOX_CMD_INITIALIZE_FIRM-
WARE failed %04x %04x
%04x %04x %04x %04x
74746
MPX200 Multifunction Router 217