HP StorageWorks 6100 - Enterprise Virtual Array

FC controller failed a Flash write (address x
data x).
ErrorFC
#%d: QLWriteFlashDword:
Write fails at addr 0x%x
data 0x%x
107984
FC controller failed the Get VP Database
command (for virtual port %d).
ErrorFC
#%d: QLGetVpDatabase:
MBOX_CMD_GET_VP_DATABASE
for VP %d fatal error
108032
FC controller failed the Get VP Database
command (for virtual port %d) with status x.
ErrorFC
#%d: QLGetVpDatabase:
MBOX_CMD_GET_VP_DATABASE
for VP %d failed %x
108033
FC controller reported failure status for an Ex-
ecute IOCB (input/output control block) com-
mand.
ErrorFC
#%d: QLVerifyMenloFw: EX-
ECUTE_COMMAND_IOCB failed
MB0 %x MB1 %x
108049
FC controller reported a fatal error while pro-
cessing an Execute IOCB command.
ErrorFC
#%d: QLVerifyMenloFw: EX-
ECUTE_COMMAND_IOCB fatal
error
108050
FC controller reported failure status for a Get
Firmware State command.
ErrorFC
#%d: QLGetFwState: Get
Firmware State failed 0-
3 %x %x %x %x
108064
Request to reset the FC processor (adapter)
received from IOCTL interface.
InfoFC
#%d: QLIoctlDisable: Re-
set adapter
118882
FC loop initialization process (LIP) occurred.
The LIP type is reported, as is the contents of
the FC processor’s mailbox 1 register.
InfoFC
#%d: QLIsrEventHandler:
LIP occurred (%x): mail-
box1 = %x
119088
FC LIP reset occurred. The LIP reset type is re-
ported, as is the contents of the FC processor’s
mailbox 1 register.
InfoFC
#%d: QLIsrEventHandler:
LIP reset occurred (%x):
mailbox1 = %x
119089
FC link up occurred. Event status is reported,
as is the contents of the FC processor’s mailbox
1 register.
InfoFC
#%d: QLIsrEventHandler:
Link up (%x) mailbox1 =
%x
119090
FC link up occurred. Event status is reported,
as is the RunTimeMode (0 = loop, 1 = point-
to-point).
InfoFC
#%d: QLIsrEventHandler:
Link mode up (%x):
RunTimeMode=%x
119092
An RSCN was received. Event status is repor-
ted, as is the RSCN information.
InfoFC
#%d: QLIsrEventHandler:
RSCN update (%x) rsc-
nInfo: %x
119093
FC port update. Event status is reported, as is
the contents of the FC processor’s mailbox 1,
2, and 3 registers.
InfoFC
#%d: QLIsrEventHandler:
Port update (%x) mb1-3 %x
%x %x
119097
RPC (remote procedure call) server initializa-
tion entry point.
ErrorUser
QBRPC_Initialize: Entered
139265
Get System API memory allocation failed.ErrorUser
QBRPC_Initialize:Get-
Bridge Mem Allocation er-
ror
139266
MPX200 Multifunction Router 221