show luninfo
Displays the status of LUN objects indenified by the DMS.
Session: miguser
Notes: The show luninfo command displays all the LUNs that are seen by the MPX200 and their
size and path information. To view a list of LUNs without the details, run the show luns command
instead.
Example:
MPX200 (miguser) #> show luninfo
MPX200 <1> (admin) #> show luninfo
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 20:78:00:c0:ff:d5:9a:05,20:78:00:c0:ff:d5:9a:05
1 20:78:00:c0:ff:d5:9a:05,21:78:00:c0:ff:d5:9a:05
2 50:06:01:60:cb:a0:35:de,50:06:01:60:4b:a0:35:de
3 50:00:1f:e1:50:0a:e1:40,50:00:1f:e1:50:0a:e1:49
4 50:00:1f:e1:50:0a:37:10,50:00:1f:e1:50:0a:37:18
5 50:00:1f:e1:50:0a:37:10,50:00:1f:e1:50:0a:37:1b
Please select a Target from the list above ('q' to quit): 5
Index (LUN/VpGroup)
----- -------------
0 0/VPGROUP_1
1 1/VPGROUP_1
2 2/VPGROUP_1
3 3/VPGROUP_1
4 4/VPGROUP_1
5 5/VPGROUP_1
6 6/VPGROUP_1
7 7/VPGROUP_1
8 8/VPGROUP_1
Please select a LUN from the list above ('q' to quit): 1
LUN Information
-----------------
WWULN 60:05:08:b4:00:05:4d:94:00:00:f0:00:35:a1:00:00
LUN Number 1
VendorId HP
ProductId HSV210
ProdRevLevel 5000
Portal 0
Lun Size 10240 MB
Lun State Online
LUN Path Information
--------------------
Controller Id WWPN, PortId Path Status
------------- --------------------------------- -----------
1 50:00:1f:e1:50:0a:37:1b, 8c-0c-00 Active Optimized
1 50:00:1f:e1:50:0a:37:18, 82-01-00 Current Optimized
Offline Data Migration328
To Next Page
Loading...
