My MSA1000 Worksheets
104 MSA1000 Installation Guide
Table 10: Information about the Hard Drives in my MSA1000
Note: Recording information about your hard drives is a two-step process.
As you configure your storage, record information about the drives in this table and turn to Table 13:
“Information about my Arrays and LUNs” on page 107 to record information about the arrays.
Note:
■ If you have one or more single-bus storage enclosures attached to your MSA1000, use this table in
conjunction with Table 11 “Information about the Hard Drives in my Attached Single-Bus Storage
Enclosures” on page 105.
■ If you have an MSA1000 with an attached dual-bus storage enclosure, use this table in
conjunction with Table 12 “Information about the Hard Drives when a Dual-Bus Storage Enclosure
is Attached” on page 106.
MSA1000
Drive Bay
SSCI ID
SCSI Bus
Serial # ________________
Box #1 Box name: ________
Transfer Rate
(Ultra 320?)
Capacity
Spindle
Speed
Array Letter
Spare Drive?
To Next Page
Loading...
