HP StorageWorks MSA1000 User Manual

Installation Procedures - for all MSA1000 Deployments
23MSA1000 Installation Guide
■ When installing or updating the HBA drivers, always use the drivers and the
installation scripts provided on the MSA1000 Support Software CD and the
MSA1000 website.
Your MSA1000 will not operate as intended if you update your HBA driver
manually or use drivers obtained from the HBA manufacturer.
■ After installing your MSA1000, remember to set your host mode to identify
your operating system to the MSA1000.
■ If you need to install Secure Path software, be sure to follow every server
reboot prompt that is presented.
Failure to acknowledge a server reboot prompt may result in your path
redundancy not functioning properly.
Be sure to reboot your server after the server portion of the install and again
after the client portion of the install.

HP StorageWorks MSA1000 Specifications

General

RAID levels	0, 1, 0+1, 5
Certification	Microsoft Cluster Server Certification\\r Hewlett Packard Data Protector\\r VERITAS Backup Exec and NetBackup\\r Legato NetWorker for Windows\\r Computer Associates BrightStor Enterprise Backup
Internal memory	256 MB
Memory clock speed	- MHz
Internal memory type	-
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	10 - 90 %
Supported storage drive interfaces	SCSI
Windows operating systems supported	Yes
Harmonized System (HS) code	84733080

Weight and Dimensions

Depth	52.1 mm
Width	48.3 mm
Height	17.5 mm
Weight	31210 g