2. Enter the administrator password if requested.
3. Pull all the magazines you want to remove out a few centimeters or inches to move them
past the latch.
4. Pull the magazines out one at a time.
5. The library cannot perform any other operation until the magazines are replaced. After
exchanging tapes in a magazine, slide the magazine completely into the library. Each
magazine locks into place after it is correctly installed. When all magazines are in place, the
library inventories the replaced magazines.
Using the RMI
To login, select the Administrator Account Type, enter the administrator password, and press
Sign In.
Figure 97 RMI login page
Go to the Operations: Magazines page. This page allows you to release the right, left, or both
magazines from the library.
Figure 98 Operations > Magazines page
Removing and replacing a magazine 191
To Next Page
Loading...
Need help?
General
