Figure 44 Configuration > System page for two logical libraries
To enable logical libraries, select the number of logical libraries in the Logical Libraries pane
and click Apply in that pane. For more information about logical libraries, see “Logical libraries”
(page 18).
The following settings affect all of the logical libraries:
• Mailslot Configuration Enabled (MSL2024, MSL4048, and MSL8048) — configures the first
slot as a mailslot or storage slot. configures the mailslot in the lower left magazine as a
mailslot or storage slots. The MSL2024 mailslot has one slot; the MSL4048 and MSL8048
68 Operating the tape library
To Next Page
Loading...
