EasyManuals Logo

HP StoreEver MSL2024 Service Manual

HP StoreEver MSL2024
220 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
Figure 49 Configuration > Network Management page
You can change:
• SNMP Enabled — When checked, the device can be managed by computers listed in the
SNMP Target IP Addresses field.
• SNMP Target IP Addresses — the IP addresses for up to three computers running IPv4
SNMP management software and up to three computers running IPv6 SNMP management
software. IP addresses will not be cleared if SNMP is disabled, but those targets will no
longer be able to manage the library and will not receive traps from the library. You can
select the SNMP version for each target address.
• Community Name — a string used to match the SNMP management station and device. It
must be set to the same name on both the management station and the library. The default
community name is public.
76 Operating the tape library

Table of Contents

Other manuals for HP StoreEver MSL2024

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP StoreEver MSL2024 and is the answer not in the manual?

HP StoreEver MSL2024 Specifications

General IconGeneral
Dimensions (WxDxH)87 x 480 x 806 mm
Media typeTape Cartridge
Form factor2U
Product typeStorage auto loader & library
Standard interfacesSerial Attached SCSI (SAS)
Number of slots (max)24
Storage media types supportedLTO-7

Related product manuals