FusionModule800 Smart Small Data Center
Installation Guide (Six Fans)
Copyright © Huawei Technologies Co., Ltd.
The object shown in the broken line box is the drainpipe connector with outer screw threads delivered
with smart cooling products. The hose clamp (part 5) is used in standard configuration. Other parts are
not configured and need to be purchased onsite.
Top Pipe Routing
Step 1 Connect the check valve to the other end of the drainpipe, as shown in Figure 3-71.
Figure 3-71 Connecting a drainpipe
Step 2 Secure the check valve and sheet metal to the right rack rail of the cabinet, as shown in Figure
3-72.
Step 3 Connect the top drainpipe, as shown in Figure 3-72.
To Next Page
Loading...
