FusionModule800 Smart Small Data Center
Installation Guide (Six Fans)
Copyright © Huawei Technologies Co., Ltd.
Figure 3-86 Incorrect battery cable connection method
Precautions for Connecting Battery Cables
For details about how to connect battery cables, see the battery cable connection diagram
delivered with the cables.
Battery trays consist of supports and trays, with space reserved between supports and
trays on adjacent layers for operation. If the battery trays need to be removed, perform
the following operations:
a. Remove the battery trays from top to bottom.
b. Install batteries and connect cables from bottom to top.
When installing batteries, install battery trays at first, then place batteries onto the trays, and
connect cables. Do not move all the batteries into the cabinet after placing the batteries on the
trays and connecting cables.
When placing batteries, install separators between adjacent batteries, as shown in Figure
3-87. If the battery capacity is 65 Ah or more, there is no need to install a separator in the
depth direction of the battery cabinet.
To Next Page
Loading...
Need help?
General