FusionModule800 Smart Small Data Center
Installation Guide (Six Fans)
Copyright © Huawei Technologies Co., Ltd.
Figure 3-216 Installing a magnetic lock
Step 5 Remove the small cover from the magnetic lock, and route the cable out of the cable hole, as
shown in Figure 3-217.
Figure 3-217 Connecting cables
Step 6 Secure the magnetic lock, as shown by (2) in Figure 3-216.
Step 7 Install the magnet.
1. Take out the magnet, and knock the positing pins of the magnet into the magnet using a
rubber mallet.
To Next Page
Loading...
Need help?
General