Huawei IDS1000-A

IDS1000-A Air-Cooled Container Data Center
All-in-One Maintenance Guide
5 Parts Replacement
Issue 01 (2016-01-10)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
117
Skill requirement: weak-current engineer
Procedure
Step 1 Remove the emergency door release button.
1. Remove screws securing the emergency door release button, as shown by 1 in Figure
5-34.
2. Remove the glass panel of the emergency door release button, as shown by 2 and 3 in
Figure 5-34.
3. Remove screws securing the base, as shown by 4 in Figure 5-34.
4. Disconnect cables and remove the emergency door release button.
Figure 5-34 Removing the emergency door release button
Step 2 Install a new emergency door release button
1. Connect cables.
2. Tighten screws on the base, as shown by 1 in Figure 5-35.
3. Install the glass panel, as shown by 2 and 3 in Figure 5-35.
4. Tighten screws, as shown by 4 in Figure 5-35.
Figure 5-35 Installing the emergency door release button
Step 3 Check that the new emergency door release button is working properly.