Figure 2-1 Example of inverter priority mode
● Bypass Priority Mode
The mains bypass output is preferred. When the mains and DG are
unavailable (due to mains overvoltage/undervoltage, overfrequency/
underfrequency), the bypass relay is disconnected. If batteries are available,
the system quickly transfers to inverter mode. In bypass mode, both PV
modules and the mains can be used to charge batteries.
Figure 2-2 Example of the bypass priority mode
iSitePower-M V100R002C00 User Manual
(MAP05A1, MAB05B1)
iSitePower-M V100R002C00 User Manual
(MAP05A1, MAB05B1) 2 Product Description
Issue 01 (2022-07-15) Copyright © Huawei Technologies Co., Ltd. 18
To Next Page
Loading...
