Figure 4-1 Solar-only network diagram (one product)
Figure 4-2 Solar-only network diagram (multiple products connected in parallel)
In the solar-only scenario, the power system works circularly as follows. The power
source preference sequence is solar power > battery.
1. If the solar power is greater than the load power, solar power is supplied to
loads and charges batteries.
2. If the solar power is less than the load power, solar power and battery power
are supplied to loads at the same time.
3. If there is no solar power, batteries power loads.
iSitePower-M V100R002C00 User Manual
(MAP05A1, MAB05B1)
iSitePower-M V100R002C00 User Manual
(MAP05A1, MAB05B1) 4 Application Scenarios
Issue 01 (2022-07-15) Copyright © Huawei Technologies Co., Ltd. 36
To Next Page
Loading...
