Huawei UA5000 - Page 110

Figure 4-4 Interconnection commissioning networking of the MG interface (over MGCP)
UA5000
MGC
10.10.20.1/24
Router
10.10.10.1/24
MGCP
10.10.10.2/24
P
V
M
B
0/11 0/12
A
S
L
A
S
L
NOTE
The UA5000 supports the independent upstream mode and the integrated upstream mode. In the
commissioning task, the independent upstream mode is used. In the case of the integrated upstream mode,
you need to run the working mode command to set the working mode of the PVMB to integrated upstream
mode.
Data Plan
Table 4-4 provides the data plan for the interconnection commissioning of the MG interface
over MGCP.
Table 4-4 Data plan for the interconnection commissioning of the MG interface (over MGCP)
Item
Data
MG interface mgid 0
protocol MGCP
port MG: 2427
MGC: 2727
domainname ua5000.com
IP address IP address of MG0 on the
UA5000
10.10.10.2/24
IP address of the MGC 10.10.20.1/24
UA5000 Universal Access Unit Product
Commissioning Guide-PVM CLI 4 Commissioning the Interconnection
Issue 04 (2012-06-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
102