Table 3-7 Meanings and settings of the H304ESC S3
DIP Switch Settings Meanings Default
Settings
S3-1 ON The H304ESC board is used in the access
network.
ON
OFF The H304ESC board is used on the Local
Exchange.
S3-2 ON The H304ESC board uses one serial port
for reporting.
OFF
OFF The H304ESC board uses two serial
ports for reporting.
S3-3 Reserved - -
S3-4 ON The reporting rate of the serial port is
19200 bit/s.
OFF
OFF The reporting rate of the serial port is
9600 bit/s.
S3-5 to S3-8 Reserved - -
ESCM DIP Switch
The ESCM environment monitoring box provides a DIP switch S1. Figure 3-3 shows the layout
of the DIP switch of the ESCM environment monitoring box.
Figure 3-3 Layout of DIP switch of ESCM environment monitoring box
ON
1
2
3 4 5 6 7 8
DIP switch
Terminal block for
environment parameter
COM1
COM2
Power socket
LED
UA5000 Universal Access Unit Product
Commissioning Guide-PVM CLI 3 Stand-Alone Commissioning
Issue 04 (2012-06-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15
To Next Page
Loading...
