Figure 3-21 Flowchart for logging in to and configuring the system in SSH mode
End
Generate the RSA
public key
Generate the SSH user
public key
Assign the public key to
the SSH user
开始
Log in to the system in SSH
mode
Create a user
Set the SSH user
authentication mode
rsa, all, and password-
publickey authentication
mode
Password-Authentication
mode
Create the local key
pair in SSH mode
Start
Set up configuration
environment
开始
Configure IP address of
service network port
Procedure
Step 1 Set up the configuration environment.
l If you log in to the UA5000 through the inband management over a LAN in SSH mode, set
up a network environment according to the networking shown in Figure 3-19.
UA5000 Universal Access Unit Product
Commissioning Guide-PVM CLI 3 Stand-Alone Commissioning
Issue 04 (2012-06-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
41
To Next Page
Loading...
