GSP9700 Series Road Force Measurement System Operation 5. Balancing Features and Options 95
5.12 Diagnosis Explanation Screen (Limits Disabled)
After the Road Force Measurement and rim runout measurements have been
taken, the GSP9700 will ask whether or not to perform QuickMatch. If any tire or rim
assembly component exceeds a non-first harmonic limit, the “Diagnosis Explanation”
popup screen will appear to provide a description of the component limit(s)
exceeded. Refer to “Theory of Operation,” page 131.
Tire and/or rim replacement may be suggested prior to ForceMatching™. When a
severe rim condition is detected, the tire results may be affected.
5.13 Diagnosis Explanation Screen (Limits Enabled)
After the Road Force Measurement and rim runout measurements have been
taken, the components are analyzed by the GSP9700 and compared to the limits. If
any tire or rim assembly component exceeds a non-first harmonic limit, the
“Diagnosis Explanation” popup screen will appear to provide a description of the
component limit(s) exceeded. Refer to “Theory of Operation,” page 131. In this case,
a prompt is indicating a rim T.I.R. limit is exceeded but is unlikely to cause a
vibration.
Tire and/or rim replacement may be suggested prior to ForceMatching™. When a
severe rim condition is detected, the tire results may be affected. In this case, a
prompt is recommending that the tire be re-tested on a better rim.
To Next Page
Loading...
