Hunter GSP9712 - Centeringcheck

30  3. Mounting Wheels on the Balancer GSP9700 Series Road Force Measurement System Operation
CenteringCheck
®
The CenteringCheck
®
feature can be used to inspect each mounting to identify
possible centering errors, thus preventing improper measurements from occurring.
The inner Dataset
®
arm, is used to measure wheel runout which is an indication of
mounting repeatability.
CenteringCheck
®
may be used with either a “bare rim” or a “rim with tire assembly.”
On-screen prompts lead you through the procedure as follows:
Select “Perform Centering Check” from the menu.
Place the inner Dataset
®
arm against the rim at a location that will maintain
unobstructed contact for a complete revolution. Refer to “Using the Auto Dataset

Arms,” page 48.
Press the outer Dataset
®
arm button or “Start” when ready to take readings.