GSP9700 Series Road Force Measurement System Operation 6. Equipment Information 107
Setting Up the Hood Autostart Feature
Enables or disables automatically starting the spin upon closing the hood.
Setting Up the Servo-Stop/Servo-Push
Enables or disables the intelligent DC motor drive to automatically rotate the wheel to
the weight or ForceMatch mark positions. Servo-Push may also be enabled, which
allows pushing the wheel (approximately 1/8 of a revolution) to cause the intelligent
DC motor drive to automatically rotate the wheel to the next weight or ForceMatch
Mark positions. Pressing the “START” key may still be used for this function.
To Next Page
Loading...
