Hunter GSP9712 - Setting up the Use Limits Feature; Setting up the Screen Saver Time-Out

106  6. Equipment Information GSP9700 Series Road Force Measurement System Operation
Setting Up the Use Limits Feature
This set up choice will allow the operator to enable or disable Runout & Road Force
limits.
If this is disabled, there will be no Road Force failures and many diagnostic
messages will not be shown.
NOTE: If this is disabled, you will not see “Runout & Road Force
Limits” on the setup menu. There will also be no choice to
set limits on the RoadForce roller from the balance screen.
Setting Up the Screen Saver Time-out
Selects the amount of inactive time that causes the screen saver to activate. Screen
saver time out options include 1 minute, 5 minutes, 15 minutes, and Disabled.