38 4. Balancing a Wheel GSP9700 Series Road Force Measurement System Operation
Static Balance Mode Reminder for “Dynamic Balance Importance”
(Except Patch Balance)
Two reminder pop-up text messages appear on the balance screen dialog box when
you first select static mode.
The first screen gives the warning: Avoid STATIC single-plane balancing.
The second screen suggests: DYNAMIC dual-plane balancing recommended (even
for hidden weights).
If STATIC is selected, the reminders show up again at the end of the spin, and if in
clip-on weight mode, the dynamic weights are shown momentarily, and then the
static weight is displayed.
To Next Page
Loading...
