GSP9700 Series Road Force Measurement System Operation 5. Balancing Features and Options 91
Move the inner Dataset
®
arm to a position centered behind a spoke, using the
DOWNWARD arm position to align the spoke location. Enter the data by pressing the
foot pedal.
Placing Hidden Weight Inside of Hollow Spokes
On some wheels, it may be possible to hide all of the right weight plane adhesive
weights inside of the hollow spoke. However, wheel construction may make it
impossible to enter the right weight plane with the inner Dataset arm.
The following example is in the mixed weight mode.
Move the inner Dataset
®
arm to left plane position. Enter the data by pressing the
foot pedal.
Measure the distance from the left weight plane to the desired right weight plane,
using a tape measure. This distance must be in millimeters (convert inches to
millimeters by multiplying by 25.4).
To Next Page
Loading...
