Hunter GSP9712 - Setting up the Quick-Thread Feature; Setting up the Balance Check Spin; Setting up the Weight Units

108  6. Equipment Information GSP9700 Series Road Force Measurement System Operation
Setting Up the Quick-Thread™ Feature
Enables or disables motor assisted threading of the wing nut.
Setting Up the Balance Check Spin
Enables or disables the load roller during balance verification spins. When enabled
the load roller will automatically disabled as necessary.
Setting Up the Weight Units
Selects the Weight Units setting for start-up of the GSP9700. This will set ounces or
grams as the default unit of measurement.