Hunter GSP9712 - Measuring Dimensions for Adhesive Weights Balancing (Tape-On;Tape-On)

50  4. Balancing a Wheel GSP9700 Series Road Force Measurement System Operation
Measuring Dimensions for Adhesive Weights Balancing
(Tape-on/Tape-on)
To enter adhesive weight dimensions for the inner plane, pull the inner Dataset
®
arm
away from the weight tray and DOWNWARD, until the roller disk edge is touching the
wheel at the right edge of the desired left weight plane location. Depress the foot
pedal to enter the dimensional data. The GSP9700 will beep to confirm data entry.
Do NOT return Dataset
®
arm to the home position.
Move the Dataset
®
arm at the right weight plane location in the DOWNWARD
position and depress foot pedal to enter dimensional data. The GSP9700 will beep to
confirm data entry.