Hunter X-CORE User Manual

14
OVERVIEW OF DECODER PROGRAMMING
NOTE: Decoders may be reprogrammed at any
time. If it is necessary to change the station
numbers previously programmed into the
decoder, the decoder may be reconnected to
the Programming Port. The station number(s)
will be displayed. Conduct the programming
procedure outlined above to reprogram the
decoder. The ICD-HP provides the convenience
of reprogramming decoders without having to
remove them from the two-wire path.

Hunter X-CORE Specifications

General

Start Times Per Program	4
Max Station Run Time	4 hours
Warranty	2 years
Application	Residential
Mounting	Wall mount
Station Timing	1 minute to 4 hours
Number of Stations	2, 4, 6, or 8
Watering Duration	1 minute to 4 hours
Display	LCD
Stations	2, 4, 6 or 8 stations
Indoor/Outdoor	Indoor or Outdoor
Seasonal Adjustment	Yes
Watering Days	7 days
Rain Delay	Yes
Power Source	24V AC transformer
Battery Backup	Yes
Programs	3