Hunter X-CORE

27
SPECIFICATIONS .....................................................................................................................
Operating Specifications
• Station Run Time: 1 minute to 6 hours on programs A, B, and C.
• Start Times: 4 per day, per program, for up to 12 daily starts.
• Watering Schedule: 7-day calendar, interval watering up to a 31-day
interval or true odd or even day programming, made possible by the
365-day clock/calendar.
Electrical Specifications
• Transformer Input: 120 VAC, 60 hz
(230 VAC, 50/60 hz International Use)
• Transformer Output: 25 VAC, 1.0 amp
• Station Output: 24 VAC, 0.56 amps per station
• Maximum Output: 24 VAC, 0.84 amps (includes Master Valve Circuit)
• Battery: 9-volt alkaline battery (not included) used only for
non-AC programming, the non-volatile memory maintains
program information
• Battery, Front Panel, Internal CR2032 Lithium for real time clock.
Dimensions
Indoor Cabinet Outdoor Cabinet
Height: 8.25" Height: 9"
Width: 9.5" Width: 10"
Depth: 3.75" Depth: 4.5"
Outdoor cabinet is NEMA 3R, IP44 rated.
Default Settings
All stations are set to zero run time. This controller has a non-volatile
memory that retains all entered program data even during power
outages, without need for a battery.
Cleaning
Clean only with cloth dampened with mild soapy water.