Hunter X-CORE User Manual

20
DIAGNOSTICS
The DUAL decoder module has features and diagnostics to
help you troubleshoot installation issues and check the status of
solenoid operation. Basically, two functions are available to the
user in the Diagnostic mode:
Read Current Function
Allows for real time current readings of solenoids operating on
the two-wire path.
1. Use the  buttons to select the “Read Current” function.
Press the  button once and the display will show the
current draw on the two-wire path.
2. The display will show current in milliamps (mA). The display
shows typical current draw for a single solenoid.
Find Solenoid Function
The “Find Solenoid” function allows the users to activate
the solenoid of a single station in a mode the produces a
“chattering” sound. This function allows for quick identication
of valves on the site.
1. Use the  buttons to select the station you would like to
operate in the "Find Solenoid" mode.
2. Press the  button once to initiate. The module will
"chatter" the solenoid for 60 seconds. Use the  button at
any time to stop the "Find Solenoid" function.
Operating Stations
The I-CORE controller can operate two programs simultaneously
or up to ve solenoids in the manual station operation model. At
any time the controller is operating stations, the station numbers
will be displayed.

Hunter X-CORE Specifications

General

Start Times Per Program	4
Max Station Run Time	4 hours
Warranty	2 years
Application	Residential
Mounting	Wall mount
Station Timing	1 minute to 4 hours
Number of Stations	2, 4, 6, or 8
Watering Duration	1 minute to 4 hours
Display	LCD
Stations	2, 4, 6 or 8 stations
Indoor/Outdoor	Indoor or Outdoor
Seasonal Adjustment	Yes
Watering Days	7 days
Rain Delay	Yes
Power Source	24V AC transformer
Battery Backup	Yes
Programs	3