19
LIGHTNING PROTECTION AND GROUNDING
In-Line Surge Arrestor Installation
Decoder ground wire
Solid bare copper
shielding wire
Place ground plate in 6" (15 cm) wide trench,
perpendicular to shielding wire, 8 feet (2.5 m)
away, 36" (1 m) below ground level. Surround plate
evenly with PowerSet material.
End-Line Surge Arrestor Installation
Decoder ground wire
Solid bare copper
shielding wire
Place ground plate in 6" (15 cm) wide trench,
perpendicular to shielding wire, 8 feet (2.5 m)
away, 36" (1 m) below ground level. Surround plate
evenly with PowerSet material.
To Next Page
Loading...
