19
Selecting Specific Days of the Week to Water
1. With the cursor on a specific day
(the cursor will always start with
MO), press the
button to activate
a particular day of the week to
water. Press the button to cancel
watering for that day. After pressing
a button the cursor automatically
advances to the next day.
2. Repeat step 1 until all desired days have been selected.
The selected days will show a
to indicate their status is ON.
The last is the last day of watering for that program.
Selecting Odd or Even Days to Water
This feature uses numbered day(s) of the
month for watering instead of specific
days of the week (odd days: 1st, 3rd, 5th,
etc.; even days: 2nd, 4th, 6th, etc.).
1. With the cursor on SU press the
button once. The icon and odd will
be displayed.
2. If odd day watering is desired, turn
the dial back to the run position.
3. If even day watering is desired, press
the button once. The icon and EVEN will be displayed.
You can move back and forth from ODD to EVEN by pressing
the and buttons.
NOTE: The 31st of any month and February 29th are
always “off” days if Odd watering is selected.
PROGRAMMING THE CONTROLLER
Selecting Interval Watering
With this option you can select
interval watering from 1 to 31 days.
1. With the cursor on EVEN, press
the
button once and the
icon will appear and a 1 flashing
in the display. Interval watering
schedule appears on the display.
2. Press the or button to select the number of days between
watering days (from 1 to 31 days). This is called the interval.
The controller will water the selected program at the next start time
and will then water at the interval programmed.
SuSuMoMo TuTu WeWe ThTh FrFr SaSa
Even
2, 4,...30
To Next Page
Loading...
Need help?
General
