Name: Hunter X-CORE
Brand: Hunter
Rating: 5 (1 reviews)

To Next Page

To Previous Page

One Touch Manual Start and Advance

You can also activate a program to water without using the dial.

1. Hold down the

button for 2 seconds.

2. This feature automatically defaults to program

A. You can select program B, or C by pressing

the

program.

3. The station number will be flashing. Press the

or button to scroll through the stations

and use the

and buttons to adjust

the station run times. (If no buttons

are pressed during step 2 or 3, the

controller will automatically begin

program A.)

4. Press the

button to scroll to the

station you wish to begin with. After a 2

second pause, the program will begin.

This feature is great for a quick cycle when extra watering is needed or if

you would like to scroll through the stations to inspect your system.

PROGRAMMING THE CONTROLLER (continued) ..............................................................

Pro-C

RUN

RAIN SENSOR

BYPASS

ACTIVE

SET CURRENT DATE / TIME

SET PROGRAM START TIMES

SET DAYS TO WATER

SET STATION RUN TIMES

SYSTEM OFF

MANUAL – ALL STATIONS

SET PUMP OPERATION

MANUAL – SINGLE STATION

Other manuals for Hunter X-CORE

Questions and Answers:

Need help?

Do you have a question about the Hunter X-CORE and is the answer not in the manual?

General